Yongnuo TC-80 Timer Remote Shutter
- Additional Information
- Reviews (0)
- Delay / Self Timer (DELAY) Just like the self timer on your camera. The timer remote switch allows you to set any delay (in 1 second increments) up to 99 hours, 99 minutes and 99 seconds.
- Interval Timer (INTVL) The Interval Timer can be set to any time period up to 100 hours as well. If you set it to 10 minutes, for example, one exposure will be taken every 10 minutes until either the film runs out or the Exposure Count limit has been reached.
- Exposure Count (N) This setting allows you to set the times of exposures that will be taken, up to a total 99 times. For example, if you set it to 30 times, then the exposure will be only taken 30 times.
- BULB/Long Exposure (LONG) It allows you to take time exposures up to 100 hours long.
• Self-Timer: 0s to 99hrs 59min 59s in one-second increments
• Interval Timer: 1s to 99hrs 59min 59s in one-second increments
• Long-Exposure Timer (Bulb-mode): 0s to 99hrs 59min 59s in one-second increments
• Exposure Count: 1 times to 399 times
• Size: 154mmL x 40mmW x 18mmH (6.1” x1.6”x0.7”)
• Net Weight: 185g
• Cable Length: 920mm
• Power Supply: Lithium CR2032(3V) Button Battery
- C1: for Canon 350D 450D/500D/600D/650D/700D/60D/70D || Pentax K20D, K200D, K10D, K100D, K110D, *ist DS, DS2, DS, DL2, DL || SAMSUNG GX-20, GX-10, GX-1L, GX-1S etc
- C3: CanonEOS 1D/1Ds/1Ds Mark II/1DS Mark II N/1D Mark III/1Ds Mark III || Canon EOS 5D/7D || Canon EOS 10D/20D/30D/40D || Canon EOS 1V/3/D30/D60
- N1:for D1/D2/D3/D4series/D810/D800E/D800/D700/D300/D200
- N3:for D600/D610/D90/D5000/D3000/D7000 series
• 1 YN TC 80 timer remote controller
• 1 timer shutter cord
• 1 mannual
• 1 button battery
|Dimensions||19 x 9 x 3.5 cm|
C1, C3, N1, N3
There are no reviews yet.