Godox X1N 2.4G X1T-N i-TTL Wireless Flash Transmitter for Nikon
Out of stock
- Additional Information
- Reviews (0)
Godox first TTL wireless flash trigger X1N applies to Nikon DSLR cameras.
Featuring multi-channel triggering, stable signal transmission, and sensitive reaction, it can be used to trigger camera shutter, studio flash and camera flash.
X1N is compatible with market-available cameras which support i-TTL.
-With 2.4G wireless transmission system, X1T-N (for Nikon) can be used to trigger camera flash, studio flash and camera shutter over 100 meters’ distance.
-Fully support TTL functions, support for i-TTL auto flash, manual flash, 1/8000 high-speed sync, flash exposure compensation, flash exposure lock, modeling flash, etc.
-With wireless grouping system (max. 5 groups & 32 channels) to satisfy various shooting requirements.
-Both transmitter and receiver equip with big LCD panel to offer convenient operation.
-Other functions satisfy various requirements, such as Delay Set, Wireless Shutter Release, Zoom Setting, etc.
-Transmitter use a PC port to input and output, receiver use a 2.5mm sync cable to output.
-Use the Micro USB port to firmware upgrade. Settings will be stored 2 seconds after last operation and recover after a restart.
|Nikon cameras(i-TTL autoflash)
|Support all cameras that have PC sync socket
|Build-in Remote System
|2.4 G wireless transmission
|TTL Auto Flash
|High Speed Sync (HSS)
|Flash Exposure Compensation (FEC)
|Support, ±3 stops 1/3 stop increments
|Flash Exposure Lock (FEL)
|Rear Curtain Sync
|Support, fired with cameras depth of field preview button
|in TTL mode, Ratio off
|in M mode, Flash Ratio(A B C)
|Support GR (grouping flash)
|Controlled Slave Groups
|in the GR grouping mode, 5 (A/B/C/D/E)
|in the Ratio grouping mode, 3(A/B/C)
|Synchronization Delay Set
|Support (0-10ms, set in unit of 100us )
|Wireless Shutter Release
|Receiver can control cameras shooting through 2.5mm shutter release interface
|The focal length can be adjusted through the transmitter
|Wide LCD panel, backlight on/off
|Transmitter: use a PC port to input and output;
|Receiver: use a 2.5mm sync cable to output
|Use the Micro USB port to upgrade
|Settings will be stored 2 seconds after last operation and recover after a restart
|Transmitter Size/ Weight
– 1 x Godox X1T-N (Transmitter)
|11 x 11 x 5.5 cm